slider7.jpg

frameless!

Magnetic License Plate Mount

Aluminium-Plate

Plastic-Plate

Fuck that FRAME OFF!

No frame, no screws, no holes. No matter if plastic bumper, aluminium trunk or steel part, the FRAMEOFF magnetic license plate mount is working with any material!

CLEAN

FAST

Unbeatable quick changing!

The time of fiddling around with number frames is over: With FRAMEOFF, your license plate is changed within seconds.

Strong

Powerful, weatherproof but no scratches!

 

FRAMEOFF magnets are custom-made products for use on vehicles. They hold your license plate with strong attraction, are saltwater resistant and allow temperatures of more than 100°C.

with frame

FRAMEOFF

CLEAN LOOK

without compromises

FRAMEOFF

no holes

no Velcro

no tinkering

Stay clean with

FRAMEOFF

how does it work?

5 CONTRA-magnets

behind the bumper

5 SOFTCOAT-magnets

on the license plate

(or aluminium-trunk)

total height of

Softcoat-Magnets

=

distance

between license

plate and car

=

4.5mm

fastened?

Material thickness

up to 8mm

holding force

     60n =   6KG

for 2.5 mm

Material

Thickness

If a license plate is mounted on plastic, aluminium, glass or any other non-magnetic material, the wall thickness, this means for example the thickness of the bumper at the relevant spot, determines the magnetic attraction. The wall thickness of a plastic bumper is usually 2 to 3 mm. With a thickness of 3 mm, FRAMEOFF magnets are holding the license plate to the vehicle at over 5.5 kg, with a wall thickness of 5 mm at over 3.6 kg and at 8 mm at around 2.1 kg. This is more than strong enough for daily use but not excessive, so the license plate can be easily removed by hand at any time.

If a number plate with FRAMEOFF magnets is directly attached to a steel tailgate or another car part made of steel, no contra magnets are required. The strength of the attraction is here influenced by the thickness of the steel plate itself. The soft-coat magnets are designed in such a way that the license plate will hold well on any sheet, but not excessively strongly..

We recommend mounting the number plate always at right angles to the direction of driving and using all 5 pairs of magnets. It is best to commission one of our installation partners or to follow the instructions exactly. In this way you can be sure that the license plate remains securely in place even at speeds of over 300 km/h.

Variations

FRAMEOFF SOLO

Set for 1 License Plate

5 Softcoat-Magnets

5 Contra-Magnets

2 Cleaning Wipes

1 Sheet Sandpaper

Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front or rear bumper. 

FRAMEOFF DUO

Set for 2 License Plates

10 Softcoat-Magnets

10 Contra-Magnets

4 Cleaning Wipes

2 Sheets Sandpaper

Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front and rear bumper.

FRAMEOFF SWITCH

Set for 2 exchangeable License Plates

on 2 different vehicles

10 Softcoat-Magnets

20 Contra-Magnets

6 Cleaning Wipes

2 Sheets Sandpaper

Magnets for 2 license plates and 4 sets of contra magnets to install on the vehicle, for example same front and back license plate to use on 2 different cars. Suitable for the Installation on non-magnetic material with up to 8 mm thickness, for example front and rear bumper. The license plate can also be installed on parts made of steel.

FRAMEOFF STEEL

Set for 1 License Plate

mounted on magnetic body part

5 Softcoat-Magnets

1 Cleaning Wipe

1 Sheet Sandpaper

Magnets for 1 license plate without contra-magnets for the vehicle. Suitable only for installation on magnetic material, for example trunk lid made of steel, front or rear panel made of steel. Not suitable for the installation on parts made of aluminium.

FRAMEOFF 3D SOLO

Set for 1 Plastic License Plate

5 Softcoat-Magnets

5 Contra-Magnets

2 Cleaning Wipes

1 Primer Pen

Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front or rear bumper. 

FRAMEOFF 3D DUO

Set for 2 Plastic License Plates

10 Softcoat-Magnets

10 Contra-Magnets

4 Cleaning Wipes

1 Primer Pen

Suitable for the installation on non-magnetic material with up to 8 mm thickness, for example front and rear bumper. 

FRAMEOFF 3D STEEL

Set for 1 Plastic License Plate

mounted on magnetic body part

5 Softcoat-Magnets

1 Cleaning Wipe

1 Primer Pen

Magnets for 1 license plate without contra-magnets for the vehicle. Suitable only for installation on magnetic material, for example trunk lid made of steel, front or rear panel made of steel. Not suitable for the installation on parts made of aluminium.

we recommend:

buy FRAMEOFF from a professional

and have it installed directly!

Aluminium-Plate

Plastic-Plate

Impressum

Datenschutz

AGB

 

AUTENA Automotive Engineering Altermatt

Hartmannweg 21, 4500 Solothurn, Switzerland